A Novel Fabrication of Heterogeneous Saponified Poly(Vinyl Alcohol)/Pullulan Blend Film for Improved Wound Healing Application.

In this study, a novel film of poly(vinyl alcohol) (PVA)/pullulan (PULL) with improved surface characteristics was prepared from poly(vinyl acetate) (PVAc)/PULL blend films with various mass ratios after the saponification treatment in a heterogeneous medium. According to proton nuclear magnetic resonance (1H-NMR), Fourier transform infrared, and X-ray diffraction results, it was established that the successful fabrication of saponified PVA/PULL (100/0, 90/10, and 80/20) films could be obtained from PVAc/PULL (100/0, 90/10, and 80/20) films, respectively, after 72 h saponification at 50 °C. The degree of saponification calculated from 1H-NMR analysis results showed that fully saponified PVA was obtained from all studied films. Improved hydrophilic characteristics of the saponified films were revealed by a water contact angle test. Moreover, the saponified films showed improved mechanical behavior, and the micrographs of saponified films showed higher surface roughness than the unsaponified films. This kind of saponified film can be widely used for biomedical applications. Moreover, the reported saponified film dressing extended the lifespan of dressing as determined by its self-healing capacity and considerably advanced in vivo wound-healing development, which was attributed to its multifunctional characteristics, meaning that saponified film dressings are promising candidates for full-thickness skin wound healing.

Millets: The future crops for the tropics - Status, challenges and future prospects.

Millets are small-grained nutritious minor cereal crops that are resistant to different abiotic stresses resulting from climate change. Despite their many benefits, millets have received limited attention in agricultural research, policies, and markets. Considering the importance of millets, recently the government many tropical countries including India and Bangladesh give more emphasis to millets cultivation and improvement. Moreover, Food and Agricultural Organization of the United Nations (FAO) declared 2023 to be the "International Years of Millets". In these connections, a details and updated review of the pros and cons of millets cultivation and its improvement in this region warrant due attention. The review therefore, examines the potential and main barriers to the adoption and promotion of millet cultivation in this region. These include limited research and development efforts, inadequate infrastructure and inputs, weak market linkages and demand, and insufficient awareness and knowledge about millets' nutritional and environmental benefits. This review also highlighted the prospects and strategies for scaling up millet cultivation in this region especially in Bangladesh. These include increasing public and private investment in research and extension services, strengthening farmers' organizations and market linkages, promoting millet-based value chains and products, and integrating millets into nation's food policy. The review concludes that millets might support equitable and sustainable agricultural growth, which would contribute to global food and nutritional security and could help attain the sustainable development goals (SDGs). However, achieving this potential will require concerted efforts from multiple stakeholders, including farmers, researchers and policymakers. The review emphasizes the need for a multi-disciplinary and multi-stakeholder approach that prioritizes innovation, inclusiveness, and sustainability. Lastly, the review highlights more investigation into the socioeconomic, environmental, and nutritional effects of millet production in this region with special emphasis on Bangladesh in order to support evidence-based policies and practices.

Deployment of fine and coarse grain rice cultivars in time and space for increased productivity.

To examine the impact of mixture ratio and temporal deployment of fine and coarse grain cultivars on rice productivity and profitability, two experiments were carried out at Bangladesh Agricultural University. In both investigations, two monsoon rice cultivars viz., Binadhan-13 (a tall, late-maturing, fine-grained) and Dhani Gold (a semi-dwarf, mid-maturing, coarse-grained) were utilized. In the 1st experiment, rice cultivars were planted in different mixture ratios viz., sole Binadhan-13, sole Dhani Gold, 1:1, 2:3, 3:2, 2:4 and 4:2 ratio of Binadhan-13 to Dhani Gold. The second study included the introducing time of Dhani Gold viz., seven days before or after or same day of Binadhan-13, sole Binadhan-13 and sole Dhani Gold. Three replications of the randomized complete block design were used for both trials. In the first experiment, both cultivars produced more when grown in mixtures as opposed to solitary cultures. Even though Dhani Gold's sole culture had the greatest yield, it was statistically equivalent to combined yields when Binadhan-13 and Dhani Gold were grown together in mixtures at 2:1, 3:1, or 4:1 ratios. The maximum net return and benefit cost ratio (BCR) were achieved when Binadhan-13 and Dhani Gold were planted in mixture following a 4:2 ratio as opposed to when Binadhan-13 was grown solely. In the second experiment, a sole cultivar generated less yield than cultivars that were transplanted on the same day, before, and after another cultivar. Cultivation of sole Binadhan-13 produced the lowest net return and minimum BCR (1.37), while the highest net return and BCR (1.81) was recorded when Dhani Gold was planted seven days before Binadhan-13 in mixture. A clear economic advantage of mixed culture with temporal deployment over the sole culture of either cultivar was evident. Therefore, transplanting Dhani Gold in a 1:1 ratio seven days before Binadhan-13 may be advised for greater output and economic return.

Preparation and Characterization of Thermal-Insulating Microporous Breathable Al/LLDPE/CaCO3 Composite Films.

Breathable films were prepared based on linear low-density polyethylene (LLDPE), calcium carbonate (CaCO3), and aluminum (Al; 0, 2, 4, and 8 wt.%) using extrusion molding at a pilot scale. These films must generally be able to transmit moist vapor through pores (breathability) while maintaining a barrier to liquids; this was accomplished using properly formulated composites containing spherical CaCO3 fillers. The presence of LLDPE and CaCO3 was confirmed by X-ray diffraction characterization. Fourier-transform infrared spectroscopy results revealed the formation of Al/LLDPE/CaCO3 composite films. The melting and crystallization behaviors of the Al/LLDPE/CaCO3 composite films were investigated using differential scanning calorimetry. Thermogravimetric analysis results show that the prepared composites exhibited high thermal stability up to 350 °C. Moreover, the results demonstrate that surface morphology and breathability were both influenced by the presence of various Al contents, and their mechanical properties improved with increasing Al concentration. In addition, the results show that the thermal insulation capacity of the films increased after the addition of Al. The composite with 8 wt.% Al showed the highest thermal insulation capacity (34.6%), indicating a new approach to transform composite films into novel advanced materials for use in the fields of wooden house wrapping, electronics, and packaging.

Corrigendum to "Impact of COVID-19 pandemic on the mental health of children in Bangladesh: A cross-sectional study" [Child. Youth Serv. Rev. 117 (2020) 105277].

[This corrects the article DOI: 10.1016/j.childyouth.2020.105277.].

Preliminary report on the comparative weed suppressibility of Bangladeshi Wheat varieties.

A key and ecologically sound strategy for integrated weed management is the use of varieties of weed-competitive crops. Utilizing wheat cultivars that are weed-competitive can lessen weed pressure and inordinate herbicide usage in wheat fields by a substantial amount. To assess the weed suppressibility of Bangladeshi wheat varieties, a field test was carried out in 2018 throughout the winter season at the Agronomy Field Laboratory, Bangladesh Agricultural University, Bangladesh. Tests on a total of 18 selected Bangladeshi wheat cultivars were conducted in both "weedy" and "weed-free" environments. Additionally, weed monoculture plots (without wheat) were kept. The experiment was replicated three times using a randomized complete block design (RCBD). The results demonstrated that wheat varieties' weed interference and production capabilities differed greatly. BARI Gom 22 permitted the most weed growth (35 m-2), whereas BARI Gom 23 allowed the least (15 m-2) at 60 DAS among the wheat types under study. Grain yield ranged between 4.42 t ha-1 (BARI Gom 20) and 5.45 t ha-1 (BARI Gom 26) in weed-free settings, whereas it fluctuated from 2.48 t ha-1 (BARI Gom 21) to 3.93 t ha-1(BARI Gom 33) in weedy condition. The extent of the relative yield loss brought on by weeds ranged from 24 to 53%, with BARI Gom 33 suffering the least and Binagom-1 suffering the most. The weed competitive index varied from 0.48 to 1.47 for the examined wheat types. Among the cultivars, Binagom-1 had the lowest WCI and BARI Gom 29 had the highest. Although BARI Gom 33 was the best yielder in weedy condition and had the lowest relative yield loss, its interference against weed was moderate. Relative to the other varieties under consideration, comparatively BARI Gom 33 was the best in terms of yield and weed interference, but it is also advocated that breeders should continually focus on developing a variety that has both excellent producing potential and robust weed suppression.

Alkaline Treatment Variables to Characterize Poly(Vinyl Alcohol)/Poly(Vinyl Butyral/Vinyl Alcohol) Blend Films.

Novel poly(vinyl alcohol) (PVA)/poly(vinyl butyral-vinyl alcohol) (P(VB-VA)) films with improved hydrophobicity were prepared from poly(vinyl acetate) (PVAc)/poly(vinyl butyral) (PVB) blend films with various mass ratios by saponification in a heterogeneous medium. The successful conversion of PVAc to PVA and PVAc/PVB to PVA/P(VB-VA) films was confirmed by Fourier transform infrared spectrometry, X-ray diffraction, and proton nuclear magnetic resonance analysis. This study also shows that the degree of saponification (DS) depends on the saponification time. The maximum DS of 99.99% was obtained at 96 h of saponification for all films, and the presence of PVB did not affect the DS at saponification times of 48-96 h. The effects of the PVAc/PVB blend ratio before and after saponification were determined by contact angle measurement, and the hydrophobicity was found to increase in both cases with increasing PVB content. Additionally, all the films exhibited improved mechanical properties after saponification, and the treated films possessed an unusual porous and uneven surface, in contrast with the untreated films. The prepared films with improved hydrophobicity can be used for various applications, such as biomaterials, filters, and medical devices.

Blown Composite Films of Low-Density/Linear-Low-Density Polyethylene and Silica Aerogel for Transparent Heat Retention Films and Influence of Silica Aerogel on Biaxial Properties.

Blown films based on low-density polyethylene (LDPE)/linear low-density polyethylene (LLDPE) and silica aerogel (SA; 0, 0.5, 1, and 1.5 wt.%) were obtained at the pilot scale. Good particle dispersion and distribution were achieved without thermo oxidative degradation. The effects of different SA contents (0.5-1.5 wt.%) were studied to prepare transparent-heat-retention LDPE/LLDPE films with improved material properties, while maintaining the optical performance. The optical characteristics of the composite films were analyzed using methods such as ultraviolet-visible spectroscopy and electron microscopy. Their mechanical characteristics were examined along the machine and transverse directions (MD and TD, respectively). The MD film performance was better, and the 0.5% composition exhibited the highest stress at break. The crystallization kinetics of the LDPE/LLDPE blends and their composites containing different SA loadings were investigated using differential scanning calorimetry, which revealed that the crystallinity of LDPE/LLDPE was increased by 0.5 wt.% of well-dispersed SA acting as a nucleating agent and decreased by agglomerated SA (1-1.5 wt.%). The LDPE/LLDPE/SA (0.5-1.5 wt.%) films exhibited improved infrared retention without compromising the visible light transmission, proving the potential of this method for producing next-generation heat retention films. Moreover, these films were biaxially drawn at 13.72 MPa, and the introduction of SA resulted in lower draw ratios in both the MD and TD. Most of the results were explained in terms of changes in the biaxial crystallization caused by the process or the influence of particles on the process after a systematic experimental investigation. The issues were strongly related to the development of blown nanocomposites films as materials for the packaging industry.

Preparation of the Heterogeneous Saponified Poly(Vinyl Alcohol)/Poly(Methyl Methacrylate-Methallyl Alcohol) Blend Film.

For the first time, poly(vinyl alcohol) (PVA)/poly(methyl methacrylate-methallyl alcohol) (P(MMA-MAA)) (9:1, 7:3, 5:5) blend films were made simultaneously using the saponification method in a heterogeneous medium from poly(vinyl acetate) (PVAc)/poly(methyl methacrylate) (PMMA) (9:1, 7:3, 5:5) blend films, respectively. The surface morphology and characteristics of the films were investigated using optical microscopy (OM), atomic force microscopy (AFM), X-ray diffractometer (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Moreover, the effect of the PVAc content on the degree of saponification (DS) of the PVAc/PMMA films were evaluated and revealed that the obtained DS value increased with the increase in PVAc content in the PVAc/PMMA blend films. According to the OM results, the saponified films demonstrated increased surface roughness compared with the unsaponified films. The AFM images revealed morphological variation among the saponified PVAc/PMMA blend films with different mass ratios of 9:1, 7:3, and 5:5. According to the DSC and TGA results, all blend film types exhibited higher thermal property after the saponification treatment. The XRD and FTIR results confirmed the conversion of the PVAc/PMMA into PVA/P(MMA-MAA) films. Thus, our present work may give a new idea for making blend film as promising medical material with significant surface properties based on hydrophilic/hydrophobic strategy.

Child marriage and its association with morbidity and mortality of under-5 years old children in Bangladesh.

INTRODUCTION: Child marriage is a significant social and health concern in many low- and middle-income countries (LMICs). This harmful practice violates children's rights and continues to be widespread across developing nations like Bangladesh. This study investigated the mortality trend among Bangladeshi children and the impact of child marriage on under-5 children morbidity and mortality in Bangladesh. METHODS AND MATERIALS: A sample of 8,321 children under-5 years old was analyzed using bivariate and multivariate statistical techniques collected from the recent 2017-18 BDHS data. Chi-square test and logistic regression (unadjusted and adjusted) were used to determine the influence of covariates on the target variable. RESULTS: Results revealed that child mortality was significantly higher among children whose mothers married at an early age than their counterparts. Although the general trend in the prevalence of different childhood mortality in Bangladesh was declining gradually from 1993 to 2018, it was still high in 2018. Also, marriage after 18 years lessens likelihood of diarrhea (adjusted OR = 0.93; 95% CI: 0.76-1.16) and cough (adjusted OR = 0.91; 95% CI: 0.78-1.17) among children. Furthermore, findings reveal that likelihood of different child mortality is higher among early married women. CONCLUSION: Immediate intervention through rigorous enforcement of policies and different programs to raise the age at marriage and by lessening socioeconomic disparities can combat the prevalence of high morbidity and mortality of under-5 years old children. Findings from this study will be helpful to accelerate strategies for achieving the Sustainable Development Goals (SDGs) related to child and maternal health by 2030.

Role of Receptors in Relation to Plaques and Tangles in Alzheimer's Disease Pathology.

Despite the identification of Aß plaques and NFTs as biomarkers for Alzheimer's disease (AD) pathology, therapeutic interventions remain elusive, with neither an absolute prophylactic nor a curative medication available to impede the progression of AD presently available. Current approaches focus on symptomatic treatments to maintain AD patients' mental stability and behavioral symptoms by decreasing neuronal degeneration; however, the complexity of AD pathology requires a wide range of therapeutic approaches for both preventive and curative treatments. In this regard, this review summarizes the role of receptors as a potential target for treating AD and focuses on the path of major receptors which are responsible for AD progression. This review gives an overall idea centering on major receptors, their agonist and antagonist and future prospects of viral mimicry in AD pathology. This article aims to provide researchers and developers a comprehensive idea about the different receptors involved in AD pathogenesis that may lead to finding a new therapeutic strategy to treat AD.

[Evaluation of a Species-specific, Stable, and Endogenous Sequence of Eggplant (Solanum melongena) using LAMP for the Detection of Genetically Modified Eggplants].

Species-specific endogenous reference sequences are indispensable in the development of methods to detect genetically modified (GM) crops for food and feed. We analyzed a partial sequence derived from the ß-fructosidase gene among several solanaceous species and developed a new eggplant specific detection method using loop-mediated isothermal amplification (LAMP). LAMP is a rapid, specific, and cost-effective technique. The species-specificity and stability of the developed method were evaluated using 18 eggplant cultivars and other crops including solanaceous plants. The limit of detection was also evaluated. The developed method showed high specificity for eggplants and stability among the eggplant cultivars tested. These results suggested that the developed method would be useful as a positive control for the detection of GM eggplants with LAMP.

Rural-urban determinants of vitamin a deficiency among under 5 children in Bangladesh: Evidence from National Survey 2017-18.

BACKGROUND: Vitamin A supplementation reduces child morbidity, mortality, and blindness of people, especially in developing countries like Bangladesh. This study explores significant determinants of vitamin A deficiency among preschool children in rural and urban areas of Bangladesh. METHODS: The data set was extracted from a nationally representative survey based on a cross-sectional study, the BDHS-2017-18. The base survey was conducted using a two-stage stratified sample of households. A sample of 8364 (urban 2911, rural 5453) children under-5 years old was analyzed using bivariate and multivariate statistical techniques. RESULTS: Results have demonstrated that 73.9 and 73.2% of children have had a vitamin A supplementation from urban and rural areas, respectively. Logistic regression analysis showed that parents' education plays a vital role in consuming vitamin A supplements in urban and rural areas. Children whose mothers have secondary (OR: 1.17, CI: 0.76-1.81) and higher (OR: 1.21, CI: 0.72-2.04) education were more likely to consume vitamin A supplementation than children whose mothers were illiterate in urban areas. However, in rural areas, children whose mothers have secondary education were about 24% and higher education with 60% more likely to consume vitamin A supplementation than children whose mothers were illiterate. Child's age, regional variation and wealth index also contributing factors for vitamin A deficiency in Bangladesh. CONCLUSIONS: These findings indicated that the consumption of vitamin A does not cover the target of sustainable development goals. Thus special national and community level efforts are required to ensure the coverage of the national vitamin A program is increased adequately to the most vulnerable groups of children in Bangladesh.

Intergenerational educational mobility in Bangladesh.

INTRODUCTION: Social mobility is considered as an important indicator of the economic development of a country. However, it varies widely across geographical regions and social groups in developing countries like Bangladesh. This paper intends to evaluate the intergenerational mobility in Bangladesh across generations. METHODS AND MATERIALS: This paper considers a nationally representative sample survey of 8,403 respondents (rural: 5,436 and urban: 2,967). The male and female respondents aged 23 years and above were included in the sample. The education attainment of a son or daughter as compared to their father's education level was considered as the measure of intergenerational mobility. Transition probability matrix and different social mobility indices were used to find out the intergenerational education mobility in Bangladesh. RESULTS: The findings reveal that approximately three-fourth (74.5%) of the respondents attained formal education, while more than half (58.3%) of the respondents' father was illiterate. The educational status of the respondents and their father who lived in urban areas was relatively better than who lived in rural areas. It is also observed that 91.2% and 81.6% of the intergenerational class movement was upward among sons and daughters respectively. The probability of a higher educated father will have a higher educated child is higher in urban areas than in rural areas of Bangladesh. The intergenerational mobility is higher in the primary, secondary, and higher secondary educational levels, though the illiterate and higher education levels are the least mobile classes. In addition, the limiting probabilities reveal that the chance of sending sons to schools by an illiterate father is less as compared to their daughters. Such difference is more obvious in the urban areas, i.e., it is highly likely that sons of the illiterate father are also illiterate. CONCLUSION: Bangladesh has been progressing remarkably in recent years. To keep the pace of the ongoing economic development in the country, it is necessary to give more attention to the illiterate people especially the girls who live in rural areas. The authors anticipate that the findings will be helpful for the policymakers as the relationship between inequality and intergenerational mobility is vital for several aspects of the economic development of a country.

Electrically Conducting Pullulan-Based Nanobiocomposites Using Carbon Nanotubes and TEMPO Cellulose Nanofibril.

Hybrid nanobiocomposite films are prepared using a solution casting by incorporating TEMPO cellulose nanofibrils (TOCNs) and carbon nanotubes (CNTs) into an aqueous solution of pullulan (PULL). The presence of CNT is confirmed by XRD characterization, and the prepared film shows an increased degree of crystallinity after the addition of TOCNs and CNT. The maximum degree of crystallinity value is obtained for CNT 0.5 % (59.64%). According to the Fourier-transform infrared spectroscopy, the shifts of the characteristic -OH peak of PULL occurred after the addition of TOCNs and aqueous CNT (3306.39 to 3246.90 cm-1), confirming interaction between the TOCNs, CNTs, and PULL matrix. The prepared films show enhanced material properties including higher tensile strength (65.41 MPa at low CNT content (0.5%)), water barrier properties, and reduced moisture susceptibility (5 wt.% CNT shows the lowest value (11.28%)) compared with the neat PULL film. Additionally, the prepared films are almost biodegradable within 64 days and show excellent electrical conductivity (0.001 to 0.015 S/mm for 0.5-5% CNT), which suggests a new approach to transform natural polymers into novel advanced materials for use in the fields of biosensing and electronics.

Impact of COVID-19 pandemic on the mental health of children in Bangladesh: A cross-sectional study.

COVID-19 pandemic poses a significant mental health threat among children in Bangladesh. This study aims to explore the impact of COVID-19 on the mental health of children during the lockdown in Bangladesh. An online cross-sectional study was conducted from 25th April to 9th May 2020 among 384 parents having at least one child aged between 5-15 years using non-probability sampling. K-means clustering used to group children according to mental health score and confirmatory factor analysis (CFA) performed to identify the relationship among the parental behavior and child mental health, and also these associations were assessed through chi-square test. Children were classified into four groups where 43% of child had subthreshold mental disturbances (mean Major Depressive Disorder (MDD)-10; 2.8), 30.5% had mild (mean MDD-10; 8.9), 19.3% suffered moderately (mean MDD-10; 15.9), and 7.2% of child suffered from severe disturbances (mean MDD-10; 25.2). The higher percentage of mental health disturbances of children with the higher education level of parents, relative infected by COVID-19 (yes), parents still need to go the workplace (yes), and parent's abnormal behavior but lower to their counterparts. This paper demonstrates large proportions of children are suffering from mental health disturbances in Bangladesh during the period of lockdown. Implementation of psychological intervention strategies and improvement in house-hold financial conditions, literacy of parents, taking care of children, and job security may help in improving the psychological/mental status of children and the authors believe that the findings will be beneficial to accelerate the rate of achieving the Sustainable Development Goal (SDG) linked to health status in Bangladesh.

Fabrication and characterization of pullulan-based nanocomposites reinforced with montmorillonite and tempo cellulose nanofibril.

Nanocomposite film of pullulan (PULL), tempo cellulose nanofibrils (TOCNs) and, montmorillonite clay (MMT) were prepared using a solution casting method with aqueous solutions. X-ray diffraction data revealed that exfoliated MMT nanoplatelets are distributed within the PULL/TOCNs/MMT film structure. Fourier-transform infrared results revealed that there might be interactions among the TOCNs, MMT and PULL matrix led to improved tensile strength, thermal stability, water barrier properties, and decrease moisture susceptibility while maintained reasonable transparency and biodegradability of the ternary PULL nanocomposites. These excellent properties of the nanocomposites clearly indicate towards a new strategy for developing high-performance PULL-based nanocomposites by using two different types of fillers with various geometric shapes and aspect ratio. This kind of ternary nanocomposite film can be broadly used in food packaging and protection as a green and biodegradable film.

Effect of land use on organic matter composition in density fractions of contrasting soils: A comparative study using 13C NMR and DRIFT spectroscopy.

13C CP-MAS nuclear magnetic resonance (NMR) and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopies were compared for evaluating their potential to characterise the influence of land use change on organic carbon (OC) chemistry of particulate organic matter (POM) and mineral associated OM (MOM) fractions of different soil types. Surface soil samples of Ferralsol, Luvisol, Vertisol and Solonetz were collected from native and crop lands and isolated into different density fractions. NMR and DRIFT showed distinct OC composition for all the soil fractions of two land uses. In NMR spectra, greater proportion of carbohydrate and aromatic C was observed in POM, while MOM fractions were rich in carbohydrate, amino groups and aliphatic C. DRIFT spectra showed greater carboxylic, aromatic C and amide N in MOM than corresponding POM. NMR spectroscopy detected charred aromatic C in both fractions, which was not feasible with DRIFT. The overall effect of land use in both techniques appeared similar on the composition of POM- OC, i.e., increased aromaticity and decreased alkyl C:O-alkyl C ratio. However, differences of land use impact were observed in MOM-OC, e.g., overall decreased aromaticity and increased alkyl C:O-alkyl C for all soils in NMR, and in DRIFT, it varied with soil type (aromaticity: Ferralsol, Vertisol > Luvisol, Solonetz). However, these trends were inconsistent and indistinct among fractions of four soils. Discrepancy in NMR and DRIFT results was ascribed to the sensitivity limitations of the two techniques in characterising soil OM in mineral rich fractions, and sample pre-treatment effect in NMR. We conclude that combination of NMR and DRIFT spectroscopy, preferably supplemented by other techniques e.g., mass spectroscopy and XPS, would improve the proficiency in elucidating small changes in soil OM composition with land use conversion.

Ethnomedicinal, phytochemical and pharmacological profile of a mangrove plant Ceriops Decandra GriffDin Hou.

Ceriops decandra is a mangrove tree species, reputed for its folkloric uses in the treatment of gastrointestinal disorders, infection, snakebites, inflammation, and cancer. Different parts of the plant are rich with various phytoconstituents which include diterpenoids (ceriopsin A-G), triterpenoids (lupeol, α-amyrin, oleanolic acid, ursolic acid), and phenolics (catechin, procyanidins).These phytoconstituents and their derivatives could form a new basis for developing new drugs against various diseases. The objective of the present study is to compile the phytochemical, ethnobotanical, biological, and pharmacological significance of the plant to provide directions for future research to find out therapeutically active lead compounds for developing new drugs against diseases of current interest including diabetes, inflammation, and cancer.

Development and evaluation of rapid screening detection methods for genetically modified crops using loop-mediated isothermal amplification.

We developed new loop-mediated isothermal amplification (LAMP)-based detection methods for the screening of genetically modified (GM) maize and soybean events. The LAMP methods developed targeted seven sequences: cauliflower mosaic virus 35S promoter; 5-enolpyruvylshikimate-3-phosphate synthase gene from Agrobacterium tumefaciens strain CP4 (cp4epsps); phosphinothricin acetyltransferase (pat) gene; mannose-6-phosphate isomerase gene; Pisum sativum ribulose 1, 5-bisphosphate carboxylase terminator; a common sequence between Cry1Ab and Cry1Ac genes; and a GA21 construct-specific sequence. We designed new specific primer sets for each target, and the limit of detection (LOD) was evaluated using authorized GM maize and soybean events. LODs for each target were ≤ 0.5%. To make the DNA extraction process simple and rapid, we also developed a direct LAMP detection scheme using crude cell lysates. The entire process, including pretreatments and detection, could be completed within 1 h.